Benchmark DAC1 HDR Manuel d'instructions télécharger pdf (Page 21)

DAC2 Series Instruction Manual Rev C Page 21

Table 1). But, long un-balanced cables

will generally suffer from hum problems

due to ground loops. We highly

recommend using balanced

interconnects for long runs.

AC Power-Entry and Fuse

Module

Fuses

CAUTION: FOR CONTINUED FIRE

HAZARD PROTECTION ALWAYS REPLACE

THE FUSES WITH THE CORRECT SIZE

AND TYPE (0.5A 250 V SLO-BLO

5 X 20

MM – LITTELFUSE® HXP218.500 OR

EQUIVALENT). THE FUSE DRAWER

INCLUDES TWO FUSES. ALWAYS

REPLACE BOTH FUSES AT THE SAME

TIME.

Voltage Selection

THE DAC2 IS EQUIPPED WITH A

UNIVERSAL POWER SUPPLY. THERE IS

NO VOLTAGE SELECTION SWITCH. AC

VOLTAGE RANGE IS 88-264 VAC, 50-60

HZ. THE PRODUCT MAY ALSO BE

OPERATED FROM DC POWER OVER A

VOLTAGE RANGE OF 125-373 VDC.

Power Cord

The AC power input uses a standard IEC type

connector. One USA-compatible power cord

is included with DAC2 converters. IEC style

power cords in country-specific configurations

are available in your locality.

CAUTION: ALWAYS USE A GROUNDED

POWER CORD. THE PRODUCT IS

EQUIPPED WITH A STANDARD IEC

POWER ENTRY MODULE. USE AN IEC

POWER CORD THAT IS EQUIPPED WITH

THE APPROPRIATE CONNECTOR FOR

YOUR LOCATION. CORDS ARE

AVAILABLE FROM YOUR DEALER.

1 2 ... 16 17 18 19 20 21 22 23 24 25 26 ... 66 67

Pas de commentaire

Benchmark DAC1 HDR Manuel d'instructions Page 21